We are running a sale on Popup Card Studio. Save 28% right now during this very limited time sale. Click here to order now!

We are also running a sale if you purchase both Make The Cut! and Popup Card Studio. Save 38% right now during this very limited time sale. Click here to order!

MTC registration key

NLGirlNLGirl Member Posts: 297
Hi all, I just purchased a new laptop because my old one is on the way out 😫

I have MTC & the plugin for my Sing. All is working and I did a test cut already, of course I need to reg my key to get rid of the watermark.
I can't get the program to accept the key. Tried typing in , copy / paste.
Any suggestions would be appreciated. Thanks


Comments

  • Liz_ALiz_A Member Posts: 10,942
    @NLGirl - if you can still get your laptop to cough up the registration code, here is a document with some how to's:

    https://www.iloveknk.com/Support/Tutorials/Make-The-Cut/Retrieving-MTC-and-PCS-Registrations.pdf

    If you are still using the same email as you were using when you purchased and registered MTC, then you can recover that (hopefully) from here;

    http://make-the-cut.com/LostRegKey.aspx

    Been some reported success/fails with that link. Once you have exhausted those resources, and no success, please come back and let us know!!

    Liz


    Still using MTC but slowly migrating to SCAL. KNK cutters including the Force and Maxx Air continue to be my favourites. Fluent in other cutter languages.
  • NLGirlNLGirl Member Posts: 297
    Liz, thank you for the links & assistance.
    I have my reg key, it's just not doing anything when I copy then try to paste it in.

  • MeFlickMeFlick Member Posts: 9,305
    Make sure it is the actual MTC registration key.  It would have come in an email from MTC and would begin with the letters MTC.  Since you note that you have a Zing (at least I think that is what you meant where it says "Sing"  ;) - they came with a PIN number that you had to use to request your MTC registration Key its self.  Some people are confused with that so wanted to point it out just in case.
    Go Vols!
    image
    Cutting with 18" Silver Bullet and a KNK Force (the rest are collecting dust!)
  • NLGirlNLGirl Member Posts: 297
    Thank you! Lol auto correct going on here on my phone. I do have the Zing. Yes it is the original key I received in an email back in 2012.
    When I made the purchase of Zing with MTC.
  • SandyMcCSandyMcC Member Posts: 7,865
    edited July 2020
    Does this original key begin with the letters "MTC?"   If yes, are you using Copy/Paste to re-enter the number?
    Sandy McCauley
    Cutting with KNK Force, Maxx Air, Zing Orbit, Skycut C and D
    Over 90 free MTC videos: http://www.iloveknk.com/support/mtc-support/
    Latest MTC User Manuals: http://www.iloveknk.com/Support/user-manuals/
  • NLGirlNLGirl Member Posts: 297
    Sandy, yes the original key begins with MTC.

    Great news! I just came back to let you guys know that I got it to work.
    I found my original CD copy of MTC then uninstalled the download and used the disk to install. Worked like a charm. So happy I had the disc.
    thank you all for your help, it was relief to see that you were all here helping each other.
    Thanks again. Stay safe everyone.
  • SandyMcCSandyMcC Member Posts: 7,865
    You will probably want to install the latest version on top of this one. You won't have to re-register, but I do know that some bugs were fixed in later versions and some changes made to MTC after that CD was released.   So, I urge you do download and run both the MTC 4.6.2 file and the Zing plugin here: http://make-the-cut.com/Download.aspx
    Sandy McCauley
    Cutting with KNK Force, Maxx Air, Zing Orbit, Skycut C and D
    Over 90 free MTC videos: http://www.iloveknk.com/support/mtc-support/
    Latest MTC User Manuals: http://www.iloveknk.com/Support/user-manuals/
  • prokoroprokoro Member Posts: 2
    edited February 7
    Hello I just purchased MTC

    Do you know How I can get a registration Key I just purchase software today of Make The Cut Forum for 79 dollars.

    Dear Mr./Mrs. Pamela Okoro,

     Thank you for placing an order with MyCommerce Share-it, an authorized reseller of Make The Cut, LLC..
    Your MyCommerce Share-it Order Number: 7xxxxxxxxx

    I can send orginal numbers

     I tried to email Technical support through email and this is what I got

    HV30ACCU4751.mtcserver.com rejected your message to the following email addresses:

    [email protected] ([email protected])
    Your message couldn't be delivered. When Office 365 tried to send the message, the external email server returned the error below. This is probably due to a problem or policy setting on the recipient's email system.

    I hope I haven't lost my money


     


     



  • Liz_ALiz_A Member Posts: 10,942
    @prokoro - the Make The Cut! website is defunct and nothing works on it, so not sure how you could have possibly purchased using www.make-the-cut.com website or the forum website. If you started from some other website, please advise.


    So since the website not there, so the email server on the website is not there.


    Please provide a screenshot of the email you got saying thank you for your purchase.

    Still using MTC but slowly migrating to SCAL. KNK cutters including the Force and Maxx Air continue to be my favourites. Fluent in other cutter languages.
  • Liz_ALiz_A Member Posts: 10,942
    @prokoro - also please give me a link for where you purchased from. I will follow up with them as selling software you can't provide a registration key for users to use it is illegal. I would immediately contact the method of payment you used, Paypal or credit card, and ask for a refund. 
    Still using MTC but slowly migrating to SCAL. KNK cutters including the Force and Maxx Air continue to be my favourites. Fluent in other cutter languages.
  • SandyMcCSandyMcC Member Posts: 7,865
    She used the links at the top of THIS forum.  :(  :(  :( 
    Sandy McCauley
    Cutting with KNK Force, Maxx Air, Zing Orbit, Skycut C and D
    Over 90 free MTC videos: http://www.iloveknk.com/support/mtc-support/
    Latest MTC User Manuals: http://www.iloveknk.com/Support/user-manuals/
  • Liz_ALiz_A Member Posts: 10,942
    That banner no longer shows on my personal page...maybe I disabled it, it only shows when I logout. The original link is this:

    https://shopper.mycommerce.com/checkout/cart/new/55354-1/55354-2?quantity_55354-1=1&quantity_55354-2=1&linkid=MTCPCSBundle&styleid=106750

    It puts both MTC and PCS into the cart. I am so sorry that this nonsense is continuing to cause problems. I did help a few people get their money back. If anyone can't get their money back, please let me know.
    Still using MTC but slowly migrating to SCAL. KNK cutters including the Force and Maxx Air continue to be my favourites. Fluent in other cutter languages.
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!